Metcore s.r.o.

OT1300

Basic configuration: LCD TFT 8.4", Touch Screen

Intel Celeron M 370, 1.5 GHz, 512 MB RAM, without frontal keys, with system fan

Optional equipment
DisplayLCD TFT 8.4" ▪ SVGA, 800×600, 256K colors ▪ 2 lamps, 400 cd/m2 ▪ Viewing angle: 120° H, 100° V
LCD TFT 10.4" ▪ SVGA, 800×600, 256K colors ▪ 2 lamps, 400 cd/m2 ▪ Viewing angle: 120° H, 100° V
LCD TFT 12.1" ▪ SVGA, 800×600, 256K colors ▪ 2 lamps, 400 cd/m2 ▪ Viewing angle: 120° H, 100° V
LCD TFT 12.1" ▪ XGA, 1024×768, 256K colors ▪ 2 lamps, 400 cd/m2 ▪ Viewing angle: 120° H, 100° V
LCD TFT 15" ▪ XGA, 1024×768, 16M colors ▪ 4 lamps, 450 cd/m2 ▪ Viewing angle: 150° H, 135° V
LCD TFT 17" ▪ SXGA, 1280X1024, 16M colors ▪ 4 lamps, 300 cd/m2 ▪ Viewing angle: 150° H, 150° V
Touch ScreenNo Touch-Screen
Touch-Screen 8.4" ▪ 5-wire resistive technology ▪ Controller integrated on-board
Touch-Screen 10.4" ▪ 5-wire resistive technology ▪ Controller integrated on-board
Touch-Screen 12.1" ▪ 5-wire resistive technology ▪ Controller integrated on-board ▪ Available also with Glass Film Glass
Touch-Screen 15" ▪ 5-wire resistive technology ▪ Controller integrated on-board ▪ Available also with Glass Film Glass
Touch-Screen 17" ▪ 5-wire resistive technology ▪ Controller integrated on-board ▪ Available also with Glass Film Glass
CPUIntel Celeron M 370 ▪ 1.5 GHz, 400 MHz front side bus, 1 MB cache ▪ socket 478 μFC-PGA
Intel Pentium M740 ▪ 1.73 GHz, 533 MHz front side bus, 2 MB cache ▪ socket 478 μFC-PGA
Intel Pentium M 760 ▪ 2 GHz, 533 MHz front side bus, 2 MB cache ▪ socket 478 μFC-PGA
FrontalFrontal panel with 4 configurable function keys
RAM Memory512 MB ▪ SODIMM DDR2 PC5300 (1 module)
1 GB ▪ SODIMM DDR2 PC5300 (1 module)
2 GB ▪ SODIMM DDR2 PC5300 (1 module)
HDD/SSDInstallation kit HDD/SSD 2.5" SATA (HDD/SSD not included)
Installation kit HDD/SSD 2.5" SATA (HDD/SSD not included) with PCI add-on
Installation kit HDD/SSD 2.5" SATA with predisposition for PC/104 plus add-on (HDD/SSD not included)
HDD 160GB 2,5" ▪ SATA 2, 3Gb/s ▪ 5400rpm, 8 MB buffer
HDD 250GB 2,5" ▪ SATA 2, 3Gb/s ▪ 5400rpm, 8 MB buffer
SSD 2,5" SATA (Solid State Disk)
Compact FlashCompact Flash UDMA (SLC)
PCI & PC/104PCI add-on kit (without HDD support)
PC/104 plus add-on predisposition kit (without HDD support)
Communication portsRS-232/422/485 serial port ▪ DB15 male connector
RS-232/422/485 serial port ▪ RS-422/485 optoisolated ▪ DB15 male connector
Parallel port SPP-EPP-ECP bidirectional ▪ DB25 male connector
Power supplyExternal, DIN guide-installed power supply 230VAC → 24VDC – 60W
WirelessWireless LAN Kit with USB interface (IEEE 802,11b/g) ▪ data rate max 54Mbps ▪ WEP 128bit
FieldbusNETCORE® X APCI fieldbus module
Warranty extensionsWarranty extension to 18 months on basic system and its variants
Warranty extension to 24 months on basic system and its variants
Warranty extension to 36 months on basic system and its variants

Additional information:

  1. PCI kit can be requested only if add-on cards have 5W max of power consumption
  2. RS-232/422/485 standard and optoisolated can be installed one as an alternative to the other only
  3. ATA/100 (Master e Slave) controller is dedicated to the two Compact Flash slot
  4. The mounting of the option affect the UL certificate validity
  5. Glass Film Glass (GFG) touchscreen option: see Addendum page for the differences with standard touchscreen configuration

Warnings:

  1. PCI and PC/104 plus kits can be supplied at OT1000 time of order only – THEY CAN NOT BE INSTALLED LATER
  2. PC/104 plus predisposition and PCI kit can be installed one as an alternative to the other only
ot1300.jpg ot1300-rozmery.png
Na vrch